Yellow off-highway dump truck beside a conveyor at an outdoor aggregate worksite, with open sky and terrain to the left.

WHO WE SERVE

Flow control for
Transportation & Construction

A truck valve that starts leaking at the stem after a few cycles becomes a field problem for you and your customer. Anderson Brass designs, builds and adapts valves for fuel, coolant, air and drain lines on commercial trucking and construction equipment, all tested under one roof in the USA.

ENGINEERED FOR REAL-WORLD CONDITIONS

What trucks and construction equipment ask of a valve

Valves on trucks and construction equipment live in fuel, coolant and compressed air, often in tight spots that are hard to reach once the build is done. They need to seal from day one, handle whatever is in the line, and keep working without anyone coming back to adjust them.

Anderson Brass 162BV two-way brass ball valve with lever handle and threaded end connections.
  • Seals that holdKantLeak™ double O-ring stem seals are rated for 20,000 leak-free cycles and never need tightening.
  • Matched to the fluidSeal compounds matched to fuel, oil, LP gas, coolant or air.
  • Fits the connection and spaceNPTF, dry seal or Shur-Loc ends as standard, with special ends and compact sizes available.
  • Low maintenance in the fieldNon-lubricated selector valves with nothing to re-lube and nothing to freeze.

RELEVANT PRODUCT CATEGORIES

Valves for every line on the truck

Start with the job the valve has to do. Each of these is built from a standard Anderson Brass line, and if nothing fits exactly, we can adapt one.

Browse all product categories →
An Anderson Brass operator using a CNC machine at the company facility.

MODIFIED & CUSTOM

Close, but not quite right?

Most truck and equipment projects start with something we already make and end with a change to it. A different end connection to match the line, a seal compound for the fluid, a 90° turn instead of full rotation, a body that fits the space on the frame. Some end as a part we design with you from scratch. Our engineers will tell you early whether a standard, modified or custom solution fits your application, then work with you to get the right part while it’s still cheap to change.

WHY ANDERSON BRASS FOR TRANSPORTATION & CONSTRUCTION

Built around equipment that has to work in the field

An Anderson Brass operator using a CNC machine at the company facility.
Fewer field failures with your name on them

A valve that leaks after delivery comes back to your name, not ours. KantLeak™ stem seals never need tightening, and every valve is tested under the same roof it’s built under.

Same part, every production run

Your production line needs the same part every run. We engineer, design, test and assemble every valve at one location in Hartsville, South Carolina.

Built to fit your frame

Equipment layouts change from model to model. We adapt proven standard valves to fit your frame and lines, and our engineers get involved before the spec is locked.

BUILT FOR WORKING RELATIONSHIPS

A project is better when the people building it stay involved

“Quote”
NameTitleCompanyIndustry Descriptor

RELATED ARTICLES

Practical reading for trucking and equipment teams

RELATED APPLICATIONS

Explore by application

Fuel nozzle inserted into a vehicle fuel inlet

Fuel

Reliable flow control for fuel systems in demanding environments.

Explore Fuel
Blue flanged water distribution pipe

Water Distribution

Durable components for water and liquid management systems.

Explore Water

FREQUENTLY ASKED QUESTIONS

Questions truck and equipment manufacturers ask

What valve is used for a truck fuel tank shut-off?
Ball valves are a common choice. Our KantLeak™ ball valves use a double O-ring stem seal rated for 20,000 leak-free cycles [VERIFY], and the stem seal never needs tightening.
Do you make air tank drain valves for trucks?
[PLACEHOLDER: answer once ABCO confirms which drain or shut-off series fits truck air tanks]
What fluids can these valves handle?
Our rising stem valves are recommended for gasoline, oil, kerosene, LP gas, gas-air mixtures, cooling systems and air systems. Stem seals come in several compounds, so tell us what is in the line and we will match the seal to it.
What end connections are available?
Standard ends are male or female NPTF, dry seal and Shur-Loc compression. Special end configurations are available by request.
Can you modify a standard valve for our equipment?
Yes. Most projects start from a standard valve with a different end connection, seal compound or rotation, and some become a part we design with you from scratch. Our engineers will tell you early which one your application needs.
Where are your valves made?
Every valve is engineered, designed, tested and assembled at our facility in Hartsville, South Carolina.

A BETTER PLACE TO BEGIN

Every project starts with a conversation

Tell us what the valve needs to do, what’s in the line and where it mounts. If a standard Anderson Brass valve fits, we’ll point you to it. If it doesn’t, we’ll work out what will.