Agricultural tractor working across a field at sunset

WHO WE SERVE

Flow control for
agricultural equipment

Sprayers, planters, irrigation systems and anything that runs on fuel all depend on valves that hold up through a full season. Anderson Brass designs, builds and adapts valves for chemical, air, water and fuel lines on agricultural equipment, all tested under one roof in the USA.

ENGINEERED FOR REAL-WORLD CONDITIONS

What agricultural equipment asks of a valve

Ag equipment moves chemicals, water, air and fuel, often on the same machine, through valves that sit outside all season and get worked hard at planting and harvest. They need to seal without adjustment, match what’s in the line and fit the space the machine allows.

Precision brass flow-control valves installed on agricultural equipment
  • Seals that holdKantLeak™ double O-ring stem seals never need tightening.
  • Matched to the fluidSeal compounds matched to the fluid, from water and fuel to air and crop chemicals.
  • Rated for line pressureRated to the pressure in the line, up to 600 PSI on the 191BVPR-2.
  • Fits the machineStandard ends, compact sizes and special configurations to fit the machine.

RELEVANT PRODUCT CATEGORIES

Valves for every line on the machine

Start with the job the valve has to do. Each of these is built from a standard Anderson Brass line, and if nothing fits exactly, we can adapt one.

Browse all product categories →
Brass manifold and valves installed in agricultural equipment

MODIFIED & CUSTOM

Close, but not quite right?

Most ag projects start with something we already make and end with a change to it. Different ports, a different seat, a different handle, a different footprint to fit the space you have. Some end as a part we design with you from scratch. Our engineers will tell you early whether a standard, modified or custom solution fits your application, then work with you to get the right part while it’s still cheap to change.

WHY ANDERSON BRASS FOR AG

Built for the equipment ag is building next

Technician checking a brass valve with precision measuring tools
Proven on heavy equipment

Our valves already work in fuel, air and cooling systems on heavy-duty construction equipment and mobile fleets. Many ag machines ask the same things of a valve.

Built for new applications

A new application is where design partnership matters most. Our engineers work through it with your team before the spec is locked, starting from proven standard parts.

One team, drawing to delivery

We engineer, design, test and assemble every valve in Hartsville, South Carolina, so one team is accountable from drawing to delivery.

BUILT FOR WORKING RELATIONSHIPS

A project is better when the people building it stay involved

[Placeholder for customer/partner quote]
NameTitleCompanyIndustry Descriptor

RELATED ARTICLES

Practical reading for agricultural equipment teams

RELATED APPLICATIONS

Explore by application

Fuel nozzle inserted into a vehicle fuel inlet

Fuel

Reliable flow control for fuel systems in demanding environments.

Explore Fuel
Blue flanged water distribution pipe

Water Distribution

Durable components for water and liquid management systems.

Explore Water

FREQUENTLY ASKED QUESTIONS

Questions agricultural equipment teams ask

What valve is used on irrigation lines?
Our KantLeak 191BVPR-2 ball valve is built for irrigation and water distribution. It has a double O-ring stem seal that never needs tightening, a stainless steel ball and a blow-out-proof stem.
What pressure can the 191BVPR-2 handle?
It is rated to 600 PSI with the bottom port as inlet and 100 PSI with the side port as inlet.
Do you make sprayer or boom valves?
[PLACEHOLDER: answer once ABCO confirms sprayer and boom applications]
Do you work with agricultural equipment manufacturers?
Yes. We work with equipment manufacturers on fuel, air and water lines today, and agriculture is an area we’re doubling down in. If you’re building it, we’d like to hear what the valve needs to do.
Can you modify a standard valve for our equipment?
Yes. We offer tailored configurations and custom OEM designs. Most projects start from a standard valve with a change to it, and some become a part we design with you from scratch. [PLACEHOLDER: minimums and typical timing]
Where are your valves made?
Every valve is engineered, designed, tested and assembled at our facility in Hartsville, South Carolina.

A BETTER PLACE TO BEGIN

Every project starts with a conversation

Tell us what the valve needs to do, what’s in the line and where it mounts on the machine. If a standard Anderson Brass valve fits, we’ll point you to it. If it doesn’t, we’ll work out what will.