
Ball Valves
Kantleak™ 2-way, 3-way and 90° ball valves for fuel, coolant, hydraulic and pneumatic lines.

Standard Solutions
You have a design to finish and a line to keep running. The valve you specify has to fit, work the same way on every unit, and be there when you reorder. Anderson Brass valves are made, assembled, and tested under one roof in Hartsville, South Carolina, by a family-owned company that has built flow control since 1931.
Product Categories

Kantleak™ 2-way, 3-way and 90° ball valves for fuel, coolant, hydraulic and pneumatic lines.

Compact ball valves for instrumentation, gas sampling, test stands and tight equipment spaces.

Kantleak™ 2- to 5-way panel-mount ball valves for instrumentation systems up to 1,500 PSI.

Two multi-port ball valves on one stem for manifold switching, sampling and fuel supply and return.

Tapered plug valves for air and water lines and fuel or water drains, plus marine fuel valves.

3-, 4- and 6-way non-lubricated selector valves for instant port selection on panels or brackets.

V1 and V3 needle valves for metering fluids and gases, from quick shut-off to micro-metering.

Metal-seated shut-off valves for cooling, air and fuel lines on trucks and construction equipment.

245 and 247 series drain valves for draining fluid from equipment, tanks and lines.

Instrumentation check valves for feed water, process, sampling and monitoring systems.

Lead-free vented dual check backflow preventers for carbonators and beverage dispensing equipment.

12–24 VDC electric actuator for quarter-turn valves, with manual override if power fails.

Toggle, push-button and strainer products for gas sampling, analysis and test equipment.
Why Anderson Brass
A standard valve should be the part you never have to think about again. Here is what stands behind ours.
Questions don’t get passed down a supply chain. Anderson Brass designs, makes, assembles and tests its valves in Hartsville, so the team that built your part can answer for it.
Our ISO 9001 certified quality system covers how we design and manufacture our valves, giving your quality and purchasing teams a process they can verify.
Your equipment may be in service for decades. Anderson Brass has made valves since 1931 under the same family, and we stand behind our work.
Anderson Brass valves are made in South Carolina. If your project carries Buy American requirements, our compliance page covers what we can provide.
View compliance information
Modified & Custom
We build custom solutions from standard components. If a valve in our catalog is close, we can adapt a proven design instead of starting over. If nothing is close, our engineers will design it with you.
Change the end connections, ports, handles or materials on a standard Anderson Brass valve to fit your product.
Explore Modified SolutionsBring us the problem before the spec is final. We design, build and test a valve around your application.
Start a ProjectAnswer a few questions about your application and the valve configurator will point you to a standard part, a modification or a conversation with our engineers.
Try the Valve ConfiguratorRelated Articles
Article placeholderStart with the flow path, operating conditions, and connections your application needs.
Read Article
Article placeholderA practical starting point for engineering and purchasing teams evaluating a valve supplier.
Read Article
Article placeholderConsider porting, packaging, and service access before starting with a new design.
Read ArticleFrequently Asked Questions
[PLACEHOLDER: distributor vs. direct purchase rules]
[PLACEHOLDER: what’s available and where]
Yes. Common changes include end connections, ports, handles and materials.
[PLACEHOLDER: confirm list]
Modified Solutions[PLACEHOLDER: lead times and minimums]
Start with the category that matches your application. If a standard valve is close but not quite right, a modification adapts a proven design instead of starting over. If you’re not sure, the valve configurator can help you narrow it down, or you can talk to an engineer.
We supply valves to equipment manufacturers in trucking and construction, food and beverage, HVAC, RV, marine and powersports, military, healthcare and more.
See all industries we serveAnderson Brass valves are proudly made, assembled and tested in Hartsville, South Carolina.
Start a Conversation
Tell us what the valve has to do. An ABCO engineer will point you to the right standard part or show you what it would take to modify one.